Radial Engineering has released the ProMS2 single-channel mic splitter for PA, recording and broadcast applications.

The ProMS2 is completely passive and uses discrete components throughout. The engine inside is an Eclipse ET-MS10 transformer that is exceptionally linear from 20Hz to 20kHz and claims less than 0.01% distortion at 20Hz. The Eclipse transformer is equipped with a mu-metal can that shields the circuit from outside electro-magnetic fields.

Features include microphone input with -30dB pad to accommodate extra high-level sources without saturating the transformer. There are three outputs – a direct-coupled output that is normally used for the main FOH PA system mixer and provides a return path for 48V phantom power; a transformer isolated output that will eliminate the hum and buzz caused by ground loops; and a direct output with a ground lift switch. This auxiliary output can be used to feed the stage monitors, recording system or remote broadcast truck.

The ProMS2 is made using heavy duty 14 gauge steel and features an internal I-beam frame that is virtually impossible to torque. A book-end design creates protective zones around the connectors and switches to further prevent mishap on busy stages. The outer shell may be removed to mount inside the J-Clamp to attach the ProMS2 to a podium or several may be ganged together and mounted in the J-Rak for multichannel installations.

‘We felt that it was time that we made a single -channel version of the OX8 that could be used for general PA applications and installations where high performance is needed at a more affordable price point,’ says Radial Production Manager Steve Hopia.

The ProMS2 is now shipping with a retail price of US$140.

More: www.radialeng.com