Powersoft Audio extends Duecanali Series of installation amplifiers with Duecanali 1602.

The two-channel model shares technology similar to that found in the new Quattrocanali but differs from the current Duecanali Series, which is based on K Series.

The amplifier is able to drive low impedance loads (2Ω/4Ω/8Ω) and 70V/100V distributed lines selectable per channel. Further, it provides more than 16 different possible output configurations (Lo-Z, Hi-Z, bridge mode, parallel mode, and combinations of these), delivering a maximum output power per channel of: 800W at 8Ω; 800W at 4Ω; 1kW at 2Ω; 2kW at 8Ω bridged; 1.6kW at 4Ω bridged; and 800W at 100V and 800W at 70V

Network audio expansion is provided by the Dante protocol with a capacity of 4x4 channels (not available in earlier Duecanali models).

More: www.powersoft-audio.com